Bleed Valves

Bleed valves can be used on instrumentation devices such as multi-valve manifolds or gauge valves to vent signal line pressure to atmosphere before removal of an instrument or to assist in calibration of control devices.

  • Compact for convenient installation.
  • Standard Male NPT end connections.
  • Working pressures up to 10 000 psig (689 bar).
  • Every Valve is factory tested at 1000 psi with Nitrogen Gas.
  • Heat Code traceability.
  • NACE MR-0-175 Compliant materials available on request.
  • All Components are Ultrasonically cleaned prior to assembly.
  • Pneumatic seat test is performed at 1000 PSI. Medium – Nitrogen gas.
  • Hydrostatic seat test is performed at 1.1 times the working pressure.
  • Hydrostatic shell test is performed at 1.5 times the working pressure.
  • All the Valves are 100% Factory Tested.
  • 3.1 Certificates furnished. 3.2 certificates available on request.
bleed_valve